The ModTruss Extrusion series directly interface with the entire ModTruss product line including the ModTruss truss lines and accessories.

• No welded product = No heat affected zone = Higher load ratings.
• Modern, Sleek, Low Profile Design.
• Long Clear Spans. Continuous lengths up to 20’.
• Rigging points, lighting, A/V mounts, etc have infinite
  placement along the Extrusion T Track.
• Each ModTruss extrusion profile has T-tracks on all 4 sides
  that can be utilized with motion accessories such as trollies
  and sliders.
• Keder Track: The “Keder Track” in each corner of the
  ModTruss Extrusions allows for easy integration of curtains,
  banners, tent skins, and more.

Hinges do not require much explanation- we use them every day in our life and often the structure
you are designing and building needs one too.
ModTruss offers a variety of hinges for your project’s needs: standard, flat, quick release, and more.

Truss Profiles

AVAILABLE IN BOTH ALUMINUM AND STEEL

Each truss series of the ModTruss line is stocked in 1-foot increments up to 10 feet in length. Each
series also has a 6” block for added flexibility in lengths. Unlike other trussing products, all 3 series of
ModTruss are compatible with and connect with one another.

Connectivity on all 6 sides: A bolt hole every 3’’ on all 6 sides which means you are no longer limited to only end-end connections.
NO CORNER BLOCKS ARE NEEDED

Reinforcement Of Truss Connections: The ability to reinforce truss connections increases load capacities allowing for longer spans
while reducing deflection.

Lamination: Lamination can double load capacities and beyond while using the same series of truss. Lamination can be achieved by placing truss on top of truss or side by side.

Compatibility: The 12” ModTruss series is Compatible with 12” Plated Entertainment Truss.

Cladding Made Easy: The flat surface of ModTruss, coupled with the numerous bolt holes, allows for a variety of cladding options.

Truss Profiles

AVAILABLE IN BOTH ALUMINUM AND STEEL

Each truss series of the ModTruss line is stocked in 1-foot increments up to 10 feet in length. Each
series also has a 6” block for added flexibility in lengths. Unlike other trussing products, all 3 series of
ModTruss are compatible with and connect with one another.

Connectivity on all 6 sides: A bolt hole every 3’’ on all 6 sides which means you are no longer limited to only end-end connections.
NO CORNER BLOCKS ARE NEEDED

Reinforcement Of Truss Connections: The ability to reinforce truss connections increases load capacities allowing for longer spans
while reducing deflection.

Lamination: Lamination can double load capacities and beyond while using the same series of truss. Lamination can be achieved by placing truss on top of truss or side by side.

Compatibility: The 12” ModTruss series is Compatible with 12” Plated Entertainment Truss.

Cladding Made Easy: The flat surface of ModTruss, coupled with the numerous bolt holes, allows for a variety of cladding options.

The ModTruss Extrusion series directly interface with the entire ModTruss product line including the ModTruss truss lines and accessories.

• No welded product = No heat affected zone = Higher load ratings.
• Modern, Sleek, Low Profile Design.
• Long Clear Spans. Continuous lengths up to 20’.
• Rigging points, lighting, A/V mounts, etc have infinite
  placement along the Extrusion T Track.
• Each ModTruss extrusion profile has T-tracks on all 4 sides
  that can be utilized with motion accessories such as trollies
  and sliders.
• Keder Track: The “Keder Track” in each corner of the
  ModTruss Extrusions allows for easy integration of curtains,
  banners, tent skins, and more.