STAGEMAKER, Electric chain hoist for rigging application

Verlinde S.A.S.

Supplier profile All products

Contact supplier Contact persons

Description

Version A : motor 3 phases with direct control

3 phase hoists (400 V/415 V/3 Ph/50 Hz) with direct voltage control (ACF board)
IP66 protection as standard
BGV-D8+ version as standard
Complies with standards : CE, DIN
Easy changeover for using motor in climbing hoist configuration or industrial suspension
Hoist delivered with G100 black electro galvanized chain (except SR25)
“CHAINFlux MKII” specially designed chain guide
“PerfectPush” : new load wheel with 5 pockets and 5 intermediate guide teeth
Class F hoisting motor
Adjustable torque limiter
2 brakes
1 brake as option
Self adjusting, maintenance free, DC disk brake
Available power supply : 400-415 V/3 Ph/50 Hz
Available power supply : 400-415 V/3 Ph/60 Hz
Available power supply : 230 V/3 Ph/50 Hz
Black painted hoist body (RAL 7021)
Rotating upper and lower hooks
Upper hook fixed and lower hook rotating (industrial suspension configuration)
Suspension bracket instead of upper hook (SL5 & 10)
Retractable, rubber clad ergonomic handgrips (except SR1 in option and not available on SR25)
Lifting hook has an ergonomic, rubber clad, gripping surface
High capacity, reversible chain bag
Standards connection cable : CE plug P17 type, 4 poles 16A (red : power supply/control)

Options :

BGV-D8 version
1 brake
Available power supply : 400-415 V/3 Ph/60 Hz
Available power supply : 230 V/3 Ph/50 Hz
Upper hook fixed and lower hook rotating (industrial suspension configuration)
Suspension bracket instead of upper hook (SL5 & 10)

Version B : motor 3 phases with low voltage control

3 phase hoists (400 V/415 V/3 Ph/50 Hz) with low voltage control (48V)
IP66 protection as standard
BGV-D8+ version as standard
Complies with standards : CE, DIN
Easy changeover for using motor in climbing hoist configuration or industrial suspension
Hoist delivered with G100 black electro galvanized chain (except SR25)
“CHAINFlux MKII” specially designed chain guide
“Limitflux” : magnetic limit switch (SL5 and SL10 1 fall)
Electric limit switch on SR1,SL10 (2 falls) and 25
“PerfectPush” : new load wheel with 5 pockets and 5 intermediate guide teeth
Class F hoisting motor
Adjustable torque limiter
2 brakes
1 brake as option
Self adjusting, maintenance free, DC disk brake
Available power supply : 400-415 V/3 Ph/50 Hz
Black painted hoist body (RAL 7021)
Rotating upper and lower hooks
Retractable, rubber clad ergonomic handgrips (except SR1 in option and not available on SR25)
Lifting hook has an ergonomic, rubber clad, gripping surface
High capacity, reversible chain bag
Standards connection cable : CE plug P17 type, 4 poles 16A (red : power supply and yellow : control)

Options :

BGV-D8 version
Gear limit switches 2 steps
Gear limit switches 4 steps
1 brake
Available power supply : 400-415 V/3 Ph/60 Hz
Available power supply : 230 V/3 Ph/50 Hz
Upper hook fixed and lower hook rotating (industrial suspension configuration)
Suspension bracket instead of upper hook (SL5 & 10)

More from us

Our website

More products by Verlinde S.A.S.

Flight case for STAGEMAKER chain Hoist

Characteristics

Configuration type “trunk”.
Top hinge cover
Panel all Birch shot 9 mm finish hexa black ultra resistant.
2 fasteners recessed Butterfly (PENN).
2 stop cover (PENN).
8 recessed spring-loaded handles (PENN).
4 casters 2 locking on turntables D100.
4 cup stacking.
Tipage pads on the sides.
2 visualization windows.
Sticker STAGEMAKER® Marking.
Sticker production plate.

Inside disposition

Mobile Cribs Sheet for easy version or double brake (ajustables).
2 Trays chain at the center.

Rigger Rack 19”, Controller for Direct control hoist

Rigger Rack 19”Direct control hoist
This range of 4/8/12 channels 19” controller rack is designed for our A Stagemaker Range.

Phase detection and automatic correction of the phases for all the range RIGGER.
Standard built-in cabling for possible remote (wired or wireless) for all the range RIGGER rack 19”.
Standard built in Master/slave functionality.
Power supply : 400/ 415 V 3PH+N – 50/60Hz.
Power-in plug 32 A 5p CE.
Multi connector output one for each 4 motors.
24/48 Vdc control voltage.
Short circuit protections : power & control circuit.
Thermal protection per group of 4 motors.
Max. power per channel : 1,8 kW / 400 V 3 PH.

Options available :

Wired remote control : remote for 4, 8 and 12 channels controller (25 m of cable).
Radio remote control : 32 channels radio receiver 19’’ and remote emitter for controller type R4SRA, R8SRA or R12SRA.
Load measuring : XLR connector and 2 m cable for connection to Set point, for integration of Stagemaker Load Cell system. 19’’ rack central radio receiver for load cell.
Flight cases : large choice of Flight case 19’’ available in Premium or Eco version, you can see here.

Theater Rack 19”, Controller for Low voltage hoist

Theater Rack 19”Low voltage hoist
This family of 4/8/12 channels controller is designed for our B Stagemaker range.

Phase detection and automatic correction of the phases for all the range THEATER.
Standard built-in cabling for possible remote option (wired or wireless) for all the range THEATER.
Standard built in Master/slave functionality.
Power supply : 400/415 V 3PH ~N – 50/60Hz.
Power supply : 400/415 V 3PH ~N – 50/60Hz.
Power-in plug 32 A 5p CE.
6 poles connectors output per hoist (type HE6).
24/48 Vdc control voltage.
Short circuit protections for power and control circuit.
Thermal protection per group of 4 motors.
Max. power per channel : 1,8 kW / 400 V 3PH.

Options available :

Wired remote control : remote for 4, 8 and 12 channels controller (25 m of cable).
Radio remote control : 32 channels radio receiver 19’’ and remote emitter for controller type R4SRB, R8SRB or R12SB.
Altimetry measure and automation : additional module for individual or group hoist positionning managment. To be integrate with B type hoist with built-in encoder.
Load measuring : XLR connector and 2 m cable for connection to Set point, for integration of Stagemaker Load Cell system.
Flight cases : large choice of Flight case 19’’ available in Premium or Eco version you can see here.

Direct control controller in suite case for 4 or 8 channels

Rigger SuitcaseDirect control hoistThis range of controller in suitcase is designed for our A Stagemaker range.

Model for 4 or 8 channels available.
Phase detection and automatic correction of the phases.
Standard built in Master/slave functionality.
Power supply : 400/ 415 V 3PH+N – 50/60Hz.
Power-in plug 32 A 5p CE.
P17 CE form 4p 16 A out for controllers in a hand case.
Short circuit protections : power & control circuit.
Thermal protection per group of 4 motors.
Max. power per channel : 1,8 kW / 400v 3 Ph.
High quality ABS professional Suitcase (Pelicase or equivalent).

Flight case for STAGEMAKER chain Hoist

Characteristics

Configuration type “trunk”.
Top hinge cover
Panel all Birch shot 9 mm finish hexa black ultra resistant.
2 fasteners recessed Butterfly (PENN).
2 stop cover (PENN).
8 recessed spring-loaded handles (PENN).
4 casters 2 locking on turntables D100.
4 cup stacking.
Tipage pads on the sides.
2 visualization windows.
Sticker STAGEMAKER® Marking.
Sticker production plate.

Inside disposition

Mobile Cribs Sheet for easy version or double brake (ajustables).
2 Trays chain at the center.

Rigger Rack 19”, Controller for Direct control hoist

Rigger Rack 19”Direct control hoist
This range of 4/8/12 channels 19” controller rack is designed for our A Stagemaker Range.

Phase detection and automatic correction of the phases for all the range RIGGER.
Standard built-in cabling for possible remote (wired or wireless) for all the range RIGGER rack 19”.
Standard built in Master/slave functionality.
Power supply : 400/ 415 V 3PH+N – 50/60Hz.
Power-in plug 32 A 5p CE.
Multi connector output one for each 4 motors.
24/48 Vdc control voltage.
Short circuit protections : power & control circuit.
Thermal protection per group of 4 motors.
Max. power per channel : 1,8 kW / 400 V 3 PH.

Options available :

Wired remote control : remote for 4, 8 and 12 channels controller (25 m of cable).
Radio remote control : 32 channels radio receiver 19’’ and remote emitter for controller type R4SRA, R8SRA or R12SRA.
Load measuring : XLR connector and 2 m cable for connection to Set point, for integration of Stagemaker Load Cell system. 19’’ rack central radio receiver for load cell.
Flight cases : large choice of Flight case 19’’ available in Premium or Eco version, you can see here.

Theater Rack 19”, Controller for Low voltage hoist

Theater Rack 19”Low voltage hoist
This family of 4/8/12 channels controller is designed for our B Stagemaker range.

Phase detection and automatic correction of the phases for all the range THEATER.
Standard built-in cabling for possible remote option (wired or wireless) for all the range THEATER.
Standard built in Master/slave functionality.
Power supply : 400/415 V 3PH ~N – 50/60Hz.
Power supply : 400/415 V 3PH ~N – 50/60Hz.
Power-in plug 32 A 5p CE.
6 poles connectors output per hoist (type HE6).
24/48 Vdc control voltage.
Short circuit protections for power and control circuit.
Thermal protection per group of 4 motors.
Max. power per channel : 1,8 kW / 400 V 3PH.

Options available :

Wired remote control : remote for 4, 8 and 12 channels controller (25 m of cable).
Radio remote control : 32 channels radio receiver 19’’ and remote emitter for controller type R4SRB, R8SRB or R12SB.
Altimetry measure and automation : additional module for individual or group hoist positionning managment. To be integrate with B type hoist with built-in encoder.
Load measuring : XLR connector and 2 m cable for connection to Set point, for integration of Stagemaker Load Cell system.
Flight cases : large choice of Flight case 19’’ available in Premium or Eco version you can see here.

Direct control controller in suite case for 4 or 8 channels

Rigger SuitcaseDirect control hoistThis range of controller in suitcase is designed for our A Stagemaker range.

Model for 4 or 8 channels available.
Phase detection and automatic correction of the phases.
Standard built in Master/slave functionality.
Power supply : 400/ 415 V 3PH+N – 50/60Hz.
Power-in plug 32 A 5p CE.
P17 CE form 4p 16 A out for controllers in a hand case.
Short circuit protections : power & control circuit.
Thermal protection per group of 4 motors.
Max. power per channel : 1,8 kW / 400v 3 Ph.
High quality ABS professional Suitcase (Pelicase or equivalent).

Flight case for STAGEMAKER chain Hoist

Characteristics

Configuration type “trunk”.
Top hinge cover
Panel all Birch shot 9 mm finish hexa black ultra resistant.
2 fasteners recessed Butterfly (PENN).
2 stop cover (PENN).
8 recessed spring-loaded handles (PENN).
4 casters 2 locking on turntables D100.
4 cup stacking.
Tipage pads on the sides.
2 visualization windows.
Sticker STAGEMAKER® Marking.
Sticker production plate.

Inside disposition

Mobile Cribs Sheet for easy version or double brake (ajustables).
2 Trays chain at the center.

Rigger Rack 19”, Controller for Direct control hoist

Rigger Rack 19”Direct control hoist
This range of 4/8/12 channels 19” controller rack is designed for our A Stagemaker Range.

Phase detection and automatic correction of the phases for all the range RIGGER.
Standard built-in cabling for possible remote (wired or wireless) for all the range RIGGER rack 19”.
Standard built in Master/slave functionality.
Power supply : 400/ 415 V 3PH+N – 50/60Hz.
Power-in plug 32 A 5p CE.
Multi connector output one for each 4 motors.
24/48 Vdc control voltage.
Short circuit protections : power & control circuit.
Thermal protection per group of 4 motors.
Max. power per channel : 1,8 kW / 400 V 3 PH.

Options available :

Wired remote control : remote for 4, 8 and 12 channels controller (25 m of cable).
Radio remote control : 32 channels radio receiver 19’’ and remote emitter for controller type R4SRA, R8SRA or R12SRA.
Load measuring : XLR connector and 2 m cable for connection to Set point, for integration of Stagemaker Load Cell system. 19’’ rack central radio receiver for load cell.
Flight cases : large choice of Flight case 19’’ available in Premium or Eco version, you can see here.

Theater Rack 19”, Controller for Low voltage hoist

Theater Rack 19”Low voltage hoist
This family of 4/8/12 channels controller is designed for our B Stagemaker range.

Phase detection and automatic correction of the phases for all the range THEATER.
Standard built-in cabling for possible remote option (wired or wireless) for all the range THEATER.
Standard built in Master/slave functionality.
Power supply : 400/415 V 3PH ~N – 50/60Hz.
Power supply : 400/415 V 3PH ~N – 50/60Hz.
Power-in plug 32 A 5p CE.
6 poles connectors output per hoist (type HE6).
24/48 Vdc control voltage.
Short circuit protections for power and control circuit.
Thermal protection per group of 4 motors.
Max. power per channel : 1,8 kW / 400 V 3PH.

Options available :

Wired remote control : remote for 4, 8 and 12 channels controller (25 m of cable).
Radio remote control : 32 channels radio receiver 19’’ and remote emitter for controller type R4SRB, R8SRB or R12SB.
Altimetry measure and automation : additional module for individual or group hoist positionning managment. To be integrate with B type hoist with built-in encoder.
Load measuring : XLR connector and 2 m cable for connection to Set point, for integration of Stagemaker Load Cell system.
Flight cases : large choice of Flight case 19’’ available in Premium or Eco version you can see here.

All products

1 / 4

More information about Prolight + Sound

About Prolight + Sound

Target groups, facts and figures for Prolight + Sound in Frankfurt.

Events of Prolight + Sound

High-quality lectures, conferences, workshops and more.

Theater + Light

Prolight + Sound offers the widest range of theatre and stage technology.

Search

STAGEMAKER, Electric chain hoist for rigging application

Verlinde S.A.S.

Description

More from us

More products by Verlinde S.A.S.

Direct control controller in suite case for 4 or 8 channels

Flight case for STAGEMAKER chain Hoist

Rigger Rack 19”, Controller for Direct control hoist

More information about Prolight + Sound

About Prolight + Sound

Events of Prolight + Sound

Theater + Light