The ModTruss Extrusion series directly interface with the entire ModTruss product line including the ModTruss truss lines and accessories.

• No welded product = No heat affected zone = Higher load ratings.
• Modern, Sleek, Low Profile Design.
• Long Clear Spans. Continuous lengths up to 20’.
• Rigging points, lighting, A/V mounts, etc have infinite
  placement along the Extrusion T Track.
• Each ModTruss extrusion profile has T-tracks on all 4 sides
  that can be utilized with motion accessories such as trollies
  and sliders.
• Keder Track: The “Keder Track” in each corner of the
  ModTruss Extrusions allows for easy integration of curtains,
  banners, tent skins, and more.

Truss Profiles

AVAILABLE IN BOTH ALUMINUM AND STEEL

Each truss series of the ModTruss line is stocked in 1-foot increments up to 10 feet in length. Each
series also has a 6” block for added flexibility in lengths. Unlike other trussing products, all 3 series of
ModTruss are compatible with and connect with one another.

Connectivity on all 6 sides: A bolt hole every 3’’ on all 6 sides which means you are no longer limited to only end-end connections.
NO CORNER BLOCKS ARE NEEDED

Reinforcement Of Truss Connections: The ability to reinforce truss connections increases load capacities allowing for longer spans
while reducing deflection.

Lamination: Lamination can double load capacities and beyond while using the same series of truss. Lamination can be achieved by placing truss on top of truss or side by side.

Compatibility: The 12” ModTruss series is Compatible with 12” Plated Entertainment Truss.

Cladding Made Easy: The flat surface of ModTruss, coupled with the numerous bolt holes, allows for a variety of cladding options.

The ModTruss Extrusion series directly interface with the entire ModTruss product line including the ModTruss truss lines and accessories.

• No welded product = No heat affected zone = Higher load ratings.
• Modern, Sleek, Low Profile Design.
• Long Clear Spans. Continuous lengths up to 20’.
• Rigging points, lighting, A/V mounts, etc have infinite
  placement along the Extrusion T Track.
• Each ModTruss extrusion profile has T-tracks on all 4 sides
  that can be utilized with motion accessories such as trollies
  and sliders.
• Keder Track: The “Keder Track” in each corner of the
  ModTruss Extrusions allows for easy integration of curtains,
  banners, tent skins, and more.

Hinges do not require much explanation- we use them every day in our life and often the structure
you are designing and building needs one too.
ModTruss offers a variety of hinges for your project’s needs: standard, flat, quick release, and more.

Truss Profiles

AVAILABLE IN BOTH ALUMINUM AND STEEL

Each truss series of the ModTruss line is stocked in 1-foot increments up to 10 feet in length. Each
series also has a 6” block for added flexibility in lengths. Unlike other trussing products, all 3 series of
ModTruss are compatible with and connect with one another.

Connectivity on all 6 sides: A bolt hole every 3’’ on all 6 sides which means you are no longer limited to only end-end connections.
NO CORNER BLOCKS ARE NEEDED

Reinforcement Of Truss Connections: The ability to reinforce truss connections increases load capacities allowing for longer spans
while reducing deflection.

Lamination: Lamination can double load capacities and beyond while using the same series of truss. Lamination can be achieved by placing truss on top of truss or side by side.

Compatibility: The 12” ModTruss series is Compatible with 12” Plated Entertainment Truss.

Cladding Made Easy: The flat surface of ModTruss, coupled with the numerous bolt holes, allows for a variety of cladding options.