Hog consoles pioneered the world of large-scale automated lighting control. They have enduring loyalty from programmers worldwide. The Hog 4 was built around the way you work, which leads to legendary ease of use. Its tools are designed for programming efficiency, which means even advanced features like pixel-mapping and plot layout are optimized for programming speed.

ETC motorized hoists incorporate a variety of patented technologies that enable us to provide safe, powerful systems at a fraction of the size and weight of other options. Our innovative compression tube eliminates lateral loads on the building which allows many venues not designed for rigging to enjoy the benefits of safe, efficient setup. P2 hoists boast an array of integrated safety features: double electromechanical motor brake, rotary limit switches, load cell with load profiling, automated slack line detection,  and more.

Prodigy Compression Tube  – Rigging anywhere. The innovative backbone of the Prodigy system absorbs and disperses lateral loads on building steel. Simply lift and snap into Prodigy mounting brackets for time and labor-saving installation.

Prodigy Right Angle Cable Adjuster (RACA)  – Saves space, work, and time. Prodigy’s RACA replaces turnbuckles to eliminate several inches of dead hang and takes only seconds (not minutes) to adjust.

Prodigy Powerhead  – Lighter than other automated hoists and one-third of the length. When used with Compression Tube, the Powerhead ships with the drop blocks and lift lines installed and pre-strung ready for easy, time-saving installation.

Prodigy Progressive Hybrid Sloped Drum  – Our patented drum design dramatically reduces the space needed for a motorized hoist. The smaller drum size means a streamlined Powerhead for the most compact rigging system on the European market. You can install Prodigy hoists where others won’t fit.

Every Prodigy hoist is tested under full load before it leaves the factory. All electrical and electronic connections, lift-line integrity and terminations, limit-switch functions, operation switches, and other components are tested by ETC factory technicians.

For over 25 years, Source Four has been synonymous with theatrical lighting. Keep those fixtures but move 4WRD with the high output but perfectly nuanced LED lighting of the Source 4WRD II. With a full family of options available, you can retrofit existing Source Four incandescent fixtures, or add to your inventory knowing that you’re gaining some of the best white-light LED technology on the market. You’ll never change another lamp.Move 4WRD in Five
It takes less than five minutes to upcycle your Source Four to 4WRD or 4WRD Color, providing a simple, cost-effective, non-destructive retrofit of existing Source Four profile fixtures. No special tools needed, and with line dimming you can plug right into your current system.
Upcycled Color
The Source 4WRD Color LED engine transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes. It means more stage looks with fewer fixtures using less energy and needing less maintenance, all at a compelling price point.

Over a decade of research comes together for the market that has inspired ETC for over 45 years. The Source Four LED Series 3 brings the brightest light to the stage with the Lustr X8 array for the most nuanced colors and the Daylight HDR array for tunable white light.We’ve added wireless DMX/RDM by integrating City Theatrical’s Multiverse® protocol, and easy NFC configuration using your mobile device and ETC’s Set Light app. Get the brightness you need from every distance, the color you’ve been craving, and the control you deserve for the most efficient workflow.

With all our products, we’ve come to hold quality to the highest standard. That’s why we are able to offer a five-year warranty on the full Source Four LED Series 3 fixture and a ten-year warranty on the LED array This falls alongside ETC’s unmatched customer support - available 24 hours a day, seven days a week, 365 days a year.

Hog consoles pioneered the world of large-scale automated lighting control. They have enduring loyalty from programmers worldwide. The Hog 4 was built around the way you work, which leads to legendary ease of use. Its tools are designed for programming efficiency, which means even advanced features like pixel-mapping and plot layout are optimized for programming speed.

ETC motorized hoists incorporate a variety of patented technologies that enable us to provide safe, powerful systems at a fraction of the size and weight of other options. Our innovative compression tube eliminates lateral loads on the building which allows many venues not designed for rigging to enjoy the benefits of safe, efficient setup. P2 hoists boast an array of integrated safety features: double electromechanical motor brake, rotary limit switches, load cell with load profiling, automated slack line detection,  and more.

Prodigy Compression Tube  – Rigging anywhere. The innovative backbone of the Prodigy system absorbs and disperses lateral loads on building steel. Simply lift and snap into Prodigy mounting brackets for time and labor-saving installation.

Prodigy Right Angle Cable Adjuster (RACA)  – Saves space, work, and time. Prodigy’s RACA replaces turnbuckles to eliminate several inches of dead hang and takes only seconds (not minutes) to adjust.

Prodigy Powerhead  – Lighter than other automated hoists and one-third of the length. When used with Compression Tube, the Powerhead ships with the drop blocks and lift lines installed and pre-strung ready for easy, time-saving installation.

Prodigy Progressive Hybrid Sloped Drum  – Our patented drum design dramatically reduces the space needed for a motorized hoist. The smaller drum size means a streamlined Powerhead for the most compact rigging system on the European market. You can install Prodigy hoists where others won’t fit.

Every Prodigy hoist is tested under full load before it leaves the factory. All electrical and electronic connections, lift-line integrity and terminations, limit-switch functions, operation switches, and other components are tested by ETC factory technicians.

For over 25 years, Source Four has been synonymous with theatrical lighting. Keep those fixtures but move 4WRD with the high output but perfectly nuanced LED lighting of the Source 4WRD II. With a full family of options available, you can retrofit existing Source Four incandescent fixtures, or add to your inventory knowing that you’re gaining some of the best white-light LED technology on the market. You’ll never change another lamp.Move 4WRD in Five
It takes less than five minutes to upcycle your Source Four to 4WRD or 4WRD Color, providing a simple, cost-effective, non-destructive retrofit of existing Source Four profile fixtures. No special tools needed, and with line dimming you can plug right into your current system.
Upcycled Color
The Source 4WRD Color LED engine transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes. It means more stage looks with fewer fixtures using less energy and needing less maintenance, all at a compelling price point.